What does Firestick Remote Blinking Orange mean?
Table of Contents
- 1 What does Firestick Remote Blinking Orange mean?
- 2 How to Fix Firestick Remote Blinking Orange
- 3 Final Words
- 4 Frequently Asked Questions
Amazon Firestick is no doubt one of the best streaming devices in the market. It supports installing many applications either from the Amazon store or you can also side load many applications. A firestick remote is a primary tool that you use for navigation and sometimes it may run into problems. There are different issues like Firestick Remote Blinking Yellow and Firestick Remote Blinking orange. Let us first find out what Firestick Remote Blinking orange means.
When you see your remote blinking orange, it is in Discovery Mode. In Discovery Mode, your remote is basically seeking permission for connecting to the device. If your Firestick remote doesn’t get the pairing process completed, it will start blinking orange three times for a few seconds. Now if you are facing the same issue, stick to this article because I will show you How to Fix Firestick Remote Blinking Orange.
How to Fix Firestick Remote Blinking Orange
There can be multiple reasons for Firestick Remote Blinking Orange and hence there is more than one solution. Below are some of the most probable solutions that will definitely work out for you.
Manually Pair your Remote
You are highly likely to face this issue when your remote is disconnected from your Firestick device. In order to sort it out, you need to manually pair your remote again with your Fire TV.
- We will reboot the Firestick device by unplugging it and then replugging it again. It will reboot the Firestick device.
- Now on your Firestick remote, press and hold the Home button until the LED on the top start blinking.
- You will see a prompt message on your screen and a blue LED blinking three times on the remote.
- Once the LED starts blinking blue, it means that pairing is successful.
- Hopefully, the remote will stop blinking orange, but if it doesn’t move on to the next step.
Reset Firestick Remote
If manual pairing doesn’t work for you, try to reset your Firestick remote. First of all, unplug the Firestick from the power source. Then press the Home, Menu, and Home buttons and hold them for 15-20 seconds. Plug in the Firestick device and let it turn on, and press the Home button on your remote. Finally, your Firestick remote will reset.
Try to Power Cycle Firestick
Just like other electronic devices, simple power cycling of your Firestick device will resolve the majority of the minor glitches. To power cycle, unplug Firestick from the power source. Wait for 2 minutes and then replug it into the power source. Once turned on, your problem may have been solved. Also, check for the firestick firmware updates, and if any are available, update it.
Reset your Firestick
Another way of fixing Firestick Remote Blinking Orange is to Reset the Firestick device. There are more than one ways to reset a Firestick device. But the simplest one is to use your remote. Turn on your TV, connect your Firestick device, and then on your remote press and hold the back and right direction buttons for 10-15 seconds. You will see a pop-up message on the screen. Select the Reset option and wait for a while until the reset is finished.
Note: Before reseting Firestick, it is advised to create a back up of your data becuase reseting will erase all your data from your Firestick device.
Check your Internet Connection
This issue of the Firestick remote blinking orange can also be due to poor or unstable internet connection. If you find any issue with your internet, restart your modem by unplugging it from the power source, wait for a few minutes, and then connect it to the power source. If it doesn’t resolve the internet connectivity issues, it is recommended to contact your internet service provider.
Check the Remote Batteries
If your Firestick remote batteries are drained and providing not have enough power to operate, then it will cause the remote to blink orange. For this reason, replace your old batteries with new ones. You can also use rechargeable batteries. Also, make sure that the battery compartment is clean before installing the batteries.
Move Closer & Remove Blockage (if any)
The distance from which you are trying to control your Firestick device also matters. Make sure that you are not more than 10 meters away from your Firestick device. If the distance is more than this, then your remote will switch to discovery mode. Another important thing to take into account is to remove any devices like Bluetooth speakers, that can potentially interrupt the connection between two devices.
Multiple Fire TV Device
With the increasing popularity of Firestick across the globe, it is now common to have more than one Firestick device in a single home. If this is the case with you, then you need to disconnect your remote from other devices. Also, while using your remote, turn the rest of the Firestick devices off and see if it resolves your problem.
If there is any physical damage to your remote, none of the above methods will work. So you can opt for the replacement of your Firestick remote. In the meantime, you can use the Firestick remote app available for Android and iOS. Try all the mentioned methods stepwise to implement the easy solutions first and more technical ones late.
If our article “How to Fix Firestick Remote Blinking Orange” has helped you, do give us your feedback in the comment section.
Frequently Asked Questions
Why is my Firestick remote blinking orange?
If your Firestick Remote starts blinking orange, it means that it has transitioned into discovery mode. It can’t pair to a Firestick device.
How do I program Firestick remote to the TV?
Go to your Firestick Settings >> Controllers & Bluetooth >> Amazon Fire TV Remote >> press and hold the Home button for 10 seconds.
Why does Firestick remote blink yellow?
The Firestick remote blinking yellow means that your remote is facing connectivity issues, firmware-related issues, or low battery.